<   Goods lifts         Goodsmaster
Goodsmaster 500kg - 1500kg

Choice of Four Models
 Whether you are lifting palletised goods, large roll containers, warehouse stock, furniture or bulky goods, heavy electrical or industrial equipment, trolleys, sack barrows or washing machines, you can choose from four models, 500kg, 750kg, 1000kg or 1500kg model to suit your exact lifting requirements.

Quick, Simple Installation
 The Goodsmaster operates inside a rapidly-erected, structure supported framework which is easy to install virtually anywhere and requires minimal builder’s work. No separate motor room or load-bearing wall or lift shaft is needed, which helps to keep costs down.

Quick Delivery
 All the Goodsmaster models can be delivered in a few weeks and can be installed and working within a few days.

Easy Handling
 Up to two-way entry on every floor to give most convenient access positions.

Entrances
 The Goodsmaster can be supplied with a single hinged steel door on 1045mm wide lift cars or double hinged steel doors on 1305/1445 mm wide lift cars, finished in grey baked enamel.

Car Entrance
 A collapsible gate is fitted to the lift car entrance as standard.

STANDARD STOCK DIMENSIONS
All dimensions are nominal and in mm

Model 500EU 500B 750EU 750B 750S
Capacity 500kg 500kg 750kg 750kg 750kg
Car
   Width 1305 1045 1305 1045 1045
   Depth † 1235 1235 1235 1235 1735
   Height 2000 2000 2000 2000 2000
Shaft
   Width 1950 1650 1950 1650 1650
   Depth 1500 1500 1500 1500 2000
Entrance
   Width 1305 1010 1305 1010 1010
   Height 2000 2000 2000 2000 2000
Serving Height(Variable) Floor Level Floor Level Floor Level Floor Level Floor Level
# Pit (Ramp) Depth 150 150 150 150 150
Head Room 2800 2800 2800 2800 2800

Model 1000B 1000EU 1000D 1000S 1500D
Capacity 1000kg 1000kg 1000kg 1000kg 1500kg
Car
   Width 1045 1305 1445 1045 1445
   Depth † 1235 1235 1435 1735 1435
   Height 2000 2000 2000 2000 2000
Shaft
   Width 1650 1950 2050 1650 2050
   Depth 1500 1500 1700 2000 1700
Entrance
   Width 1010 1305 1410 1010 1410
   Height 2000 2000 2000 2000 2000
Serving Height(Variable) Floor Level Floor Level Floor Level Floor Level Floor Level
# Pit (Ramp) Depth 150 150 150 150 150
Head Room 2800 2800 2800 2800 3000

IMPORTANT NOTE: Motor Housing and Pit/Ramp
* MOTOR HOUSING: It will be necessary to provide access for servicing via lockable double hinged doors for the full depth of the lift shaft. These are available as an option. (Not fire rated).
# PIT OR RAMP: The Goodsmaster normally serves at floor level and would require a pit in the lowest floor. If you are unable to provide a pit, the Goodsmaster can be installed to serve at 150mm above the lowest floor and a ramp will need to be provided by your builder.
In the event of there being a space or void beneath the base of the lift shaft that is accessible to persons, i.e. a floor level or basement below, car park, service area or similar, extra lift equipment or strengthening of the lift shaft floor may be required. If the situation exists you must contact us for additional advice and information.
† CAR DEPTH: With a through car entrance arrangement, the inside car depth reduces by 25mm nominal.
N.B. Consideration must be given to protect any accessible space beneath the bottom of the lift shaft. We would be pleased to provide further information if required.
DOWNLOADS:
Below is a range of data sheets, brochures and plans to assist you
in your choice of lift installation. More information is provided by
CE Lift Installations, phone: 01285 841 435

Microlift
Trolleylift
Goodsmaster
Data Sheets
Copyright ©2009 CE Lift Installations Limited.
tel: +44 (0)1285 841 435