<   Goods lifts         Microlift
Microlift 50kg and 100kg
Dumbwaiter By CE Lifts Dumbwaiters by CE Lifts Goods Dumbwaiter by CE Lifts Goods Dumbwaiters by CE Lifts

Wide Range
 Four 50kg and two 100kg models cater for every lifting requirement – from food, laundry and documents to beer crates and barrels, small trolleys and industrial equipment.

Quick, Simple Installation
 The Microlift operates inside a rapidly-erected, structure supported frame which is easy to install and requires minimal builder’s work. No separate motor room or load-bearing shaft is needed, which helps to keep costs down.

Available from Stock
 All models are normally available from stock, which means that a Microlift can be installed and working within a few days, depending on the building work.

Easy Handling
 Up to three-way entry on every floor to give most convenient access positions.

Proven Quality & Reliability
 Over 60,000 installations throughout the world are convincing proof of Microlift engineering quality and reliability.

Choice of Finishes
 The finish of the lift car and rise and fall shutters can be tough grey baked enamel or stainless steel.

STANDARD STOCK DIMENSIONS
All dimensions are nominal and in mm

Model DD50 50A 50B 50C 100A 100A 100B 100B
Shutters RF RF RF RF RF HD RF HD
Capacity 50kg 50kg 50kg 50kg 100kg 100kg 100kg 100kg
Car
   Width 510 545 520 620 720 720 820 820
   Depth 320 420 520 620 720 720 820 820
   Height 800 800 800 800 1000 1000 1200 1200
Shaft
   Width 725 820 800 900 1000 1000 1100 1100
   Depth 520 640 800 900 1000 1000 1100 1100
Entrance
   Width 320* 420* 420 520 620 650*** 720 750***
   Height 770 770 770 770 970 1000*** 1170 1200***
Serving Height(Variable) 800 800 800 800 800 Floor Level 800 Floor Level
Pit Depth - - - - - 350** - 350**
Head Room 2600 2600 2600 2600 2800 2000 3000 2200
Note:
Shutters
RF=Rise and Fall, HD=With Hinged Door serving at floor level
* Entrance position ‘B’ is not available on the DD50 model but can be provided on the 50A model with a reduced entrance width of 320mm.
** A reduction in the pit depth is possible – please contact us for details.
*** ENTRANCE DIMENSIONS – These are reduced as follows if a collapsible picket gate is fitted to the lift car:-
100A 550mm Wide 865mm High
100B 650mm Wide 1065mm High
Note:
Some of the above dimensions can be varied to suit your individual requirements – by modification of stock models or by special manufacture – please contact us for details.
DOWNLOADS:
Below is a range of data sheets, brochures and plans to assist you
in your choice of lift installation. More information is provided by
CE Lift Installations, phone: 01285 841 435

Microlift
Trolleylift
Goodsmaster
Data Sheets
Copyright ©2009 CE Lift Installations Limited.
tel: +44 (0)1285 841 435