<   Goods lifts         Microlift Double Decker
Microlift Double Decker 50Kg/100Kg
The Double Decker provides two lift cars in the same shaft, ideal where space is restricted. Loading and serving is at floor and counter levels. The lower car entrance has a hinged gate, the upper car has rise and fall shutters.

STANDARD STOCK DIMENSIONS
All dimensions are nominal and in mm

All 50kg models are available only with rise and fall shutters.
Model 50B DD 50C DD 100A DD 100B DD
Combined Capacity (2 cars) 50kg 100kg 100kg 100kg
Each Car
   Width 520 620 720 820
   Depth 520 620 720 820
   Height 800 800 800 800
Shaft
   Width 800 900 1000 1100
   Depth 800 900 1000 1100
Entrance
   Width 420 520 620 720
   Height 770 770 770 770
Serving Height        
   Top Car 1010 1010 1010 1010
   Bottom Car Floor Level Floor Level Floor Level Floor Level
Pit Depth 350 350 350 350
Head Room 3000 3000 3000 3000



Specification

Car
Constructed in mild steel, finished in grey baked enamel with a stainless steel base and a removable stainless steel shelf. The car can also be finished in stainless steel.

Speed
0.35m/s

Entrances
High quality, smooth operation rise and fall shutters are fitted with safety locks and can be finished in either grey baked enamel or stainless steel. Hinged doors are available as an option on all models.

Car entrance protection
To meet the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations, the lift car is supplied with car entrance protection as standard. This protects goods from falling whilst the lift is in motion.

Entry choice
Up to two entrances can be fitted on each floor.

Control
Fully automatic push button control with call and despatch facilities at each entrance for ease of use.

Indicators
"Lift arrival", "lift occupied" and "lift position" indicators are fitted at each entrance, together with an audible lift arrival buzzer.

Travel
Up to 12 stops over a total distance of 36m of travel.

Mounting
The Microlift is supplied in a structure-supported frame which is galvanised for longer life. We do not require a separate motor room or "load-bearing" lift shaft. For more information, please ask for our builders work details.

Motor
Mounted at the top of the lift structure, the smooth, quiet motor drives a high quality reduction gearbox fitted with a traction vee-sheave. An electro-magnetic disc brake is supplied, with emergency release mechanism. The reliable controller and counter-balance drive system ensure electrical consumption is minimal.

Safety
Complies with the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations 1992, also known as the Machinery Directive and EN 81-3 where applicable.

Additional options include
Heated car, additional and/or heated shelves, intercom system and load weighing.

Safe Maintenance Access
A service engineer must be able to access the motor compartment in a safe manner. The lift owner must provide a safe means of access up to the motor compartment. Access doors to the motor compartment are required on one or two faces of the lift shaft, depending on the configuration of the lift. The doors must be hinged and lockable.
Our builders work drawings contain more detailed information on this topic but please do not hesitate to contact us if you have any questions.
For further advice please contact our experienced team of lift engineers, phone: 01285 841 435
DOWNLOADS:
Below is a range of data sheets, brochures and plans to assist you
in your choice of lift installation. More information is provided by
CE Lift Installations, phone: 01285 841 435

Microlift
Trolleylift
Goodsmaster
Data Sheets
Copyright ©2009 CE Lift Installations Limited.
tel: +44 (0)1285 841 435