This Microlift model is a dumb waiter designed for premises with restricted headroom. The motor unit is located on the side of the shaft thus
offering reduced headroom. Loading and serving is from a counter level entrance with rise and fall shutters.
Specification
Car
Constructed in mild steel, finished in grey baked enamel with a stainless steel base and a removable stainless steel shelf.
The car can also be finished in stainless steel.
Speed
0.35m/s
Entrances
High quality, smooth operation rise and fall shutters are fitted with safety locks and can be finished in either grey baked
enamel or stainless steel. Hinged doors are available as an option on all models.
Car entrance protection
To meet the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations, the lift car is supplied with car entrance
protection as standard. This protects goods from falling whilst the lift is in motion.
|
STANDARD STOCK DIMENSIONS
All dimensions are nominal and in mm
| Model |
50C LH |
| Capacity |
50kg |
| Car |
| Width |
620 |
| Depth |
620 |
| Height |
800 |
| Shaft |
| Width |
900 |
| Depth |
900 |
| Entrance |
| Width |
520 |
| Height |
770 |
| Serving Height(Variable) |
800 |
| Pit Depth |
- |
| Head Room |
2200 |
|
Entry choice
Up to two entrances can be fitted on each floor.
Control
Fully automatic push button control with call and despatch facilities at each entrance for ease of use.
Indicators
"Lift arrival", "lift occupied" and "lift position" indicators are fitted at each entrance, together with an audible lift arrival buzzer.
Travel
Up to 12 stops over a total distance of 36m of travel.
Mounting
The Microlift is supplied in a structure-supported frame which is galvanised for longer life. We do not require a separate motor room or
"load-bearing" lift shaft. For more information, please ask for our builders work details.
Motor
Mounted at the top of the lift structure, the smooth, quiet motor drives a high quality reduction gearbox fitted with a traction vee-sheave.
An electro-magnetic disc brake is supplied, with emergency release mechanism. The reliable controller and counter-balance drive system
ensure electrical consumption is minimal.
Safety
Complies with the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations 1992, also known as the Machinery Directive
and EN 81-3 where applicable.
Additional options include
Heated car, additional and/or heated shelves, intercom system and load weighing.
Safe Maintenance Access
A service engineer must be able to access the motor compartment in a safe manner. The lift owner must provide a safe means of access
up to the motor compartment. Access doors to the motor compartment are required on one or two faces of the lift shaft, depending on
the configuration of the lift. The doors must be hinged and lockable.
Our builders work drawings contain more detailed information on this topic but please do not hesitate to contact us if you have any questions.
For further advice please contact our experienced team of lift engineers, phone: 01285 841 435
|
