Omer Rex Gold Car Parking Lift

Enquire Now
Call 07973 819822
or fill out the form

Please fill in all the fields marked with
an asterisk (*).

Omer Rex GOLD range car parking lift

Max load: 3000kg

Industry Sectors:

Scissor Lifts |

This is a standard model/configuration. We can do any bespoke type/size made to your requirements.


The two lifting pistons are set at the centre of the unit, installed on the mobile structure of the legs, thus minimizing any type of encumbrance. The pistons are manufactured by Omer SPA.

At the center, the two cylinders are attached by a fixed connection and from there run to the hydraulic system. A bar has been installed on the left piston to hold the three types of limit switches, adjustable according to the desired height.
Two limit switches for the top level, two for the lower level and one safety.

All connection systems — both hydraulic and electrical — are installed along the legs of the machine, thus they do not take up any extra space and are easy to maintain. All systems are preinstalled on the unit.
Moreover, all connections have a catenary protection that keeps them in their housing, protecting them from forced or abrupt bending and thus preventing breakage. As can be seen, the legs slide on two continuous grooves fixed to the ground with mechanical anchors. The two bases are also suitably shaped to prevent the leg slide wheels from popping out in case of uneven operation.

Both hydraulic pistons have valves so that the pressure differential can be read. Any sudden leak of oil from the circuit, resulting in an abrupt drop in pressure, activates the parachute valves, immediately closing the hydraulic con- nection to the piston itself, promptly locking the platform.

If the installation site presents problems, REX Gold 30 can have flanged connection beams (flanging on the upper beam) so that the unit can be set in the lift shaft unassembled. The central leg securing pin is inserted into a reinforcement on the legs themselves, thus ensuring greater resistance to wear. The auxiliary lever is connected to the back leg; it centers all the legs vs. the central axis of the unit and thus provides additional safety, preventing the structure from disengaging or improper lateral movement.

In order to ensure that the whole assembly is extremely compact, the hydraulic unit - Electro-hydraulic pump and oil tank - is built as one with the electric control panel.

The great accessibility of the hydraulic block, the speed control valves and the manometer controlling operating pressure make this maintenance and intervention on ma- chine even simpler and safer.

The REX Gold 30 platform maximum height above ground is 4.10 mt and its standard load bearing capacity is 3,000 Kg (which can be increased to up to 4,000 Kg). Thanks to the lift symmetry, the weight does not need to be centered on the platform itself, thus it can double as either goods lift or car lift.

Despite its sturdiness, the REX Gold 30 (which weighs a total of 4,000 Kg) is extremely compact, requiring a pit of just 51 cm.

Moreover, to ensure greater resistance to the weather and outside factors, the platform is fully galvanized.

Note the platform stop (standard) which ensures correct positioning of the vehicle from the front edge. This detail ensures utmost safety, preventing any abrupt forward movement of the vehicle while the platform is being moved. Another such stop is found at the back.

The underlying part of the platform is supported by a steel skeleton that ensures utmost reliability.

The platform is composed of a series of galvanized panels which are both extremely sturdy - given the shape of the panels - and light.

The REX Gold 30 platform is the top of the line of all pantographic platforms (also called scissor lifts).

REX Gold 30 has four mobile points at the ends of the two double legs, thus ensuring perfect symmetry and preventing the need for any overhanging platform parts.

Moreover, it has two outside valves installed on the so-called double effect hydraulic pistons. To lower the platform, pressurized oil must be fed into the pistons through the safety valves, thus controlling the rate at which it is lowered.

Besides the standard buttons to operate movement, the pushbutton panel has a “mushroom-shaped” emergency button and an activation key.