<   Goods lifts         Trolleylift
Trolleylift 250kg and 300kg

Choice of Two Models
 Whether you are lifting beer barrels, sack barrows, large roll containers or washing machines, you can choose either the 250kg or 300kg model to suit your exact lifting requirements.

Quick, Simple Installation
 The Trolleylift operates inside a rapidly-erected, structure supported framework which is easy to install and requires minimal builder’s work. No separate motor room or load-bearing shaft is needed, which helps to keep costs down.

Available from Stock
 Both models are available from stock, which means that a Trolleylift can be installed and working within a few days.

Easy Handling
 Up to three-way entry on every floor to give most convenient access positions.

Entrances
 The Trolleylift can be supplied with single hinged steel doors with grey baked enamel finish at landing entrances or concertina shutter leaf gates with galvanised finish.

Car Entrance Protection
 To protect loads during travel, a collapsible picket gate, electrically interlocked for safety, is available if required.

STANDARD STOCK DIMENSIONS
All dimensions are nominal and in mm

250KG... 1375 HIGH CAR 250H 250C 250HP 250CP
Landing Entrance Hinged Concertina Shutter Hinged Concertina Shutter
Landing Clear   leaf gate   leaf gate
Entrance(Nominal)
   Width 900 765 785 760
   Height 1375 1375 1240 1240
Car Entrance Protection at Front Only None None Collapsible Gate Collapsible Gate
   Internal Car Width 1000 1000 **1000 **1000
   Internal Car Depth 1000 1000 **950 **950
   Internal Car Height 1375 1375 1350 1350
Shaft
   Width 1320 1320 1320 1320
   Depth 1320 1320 1320 1320
Serving Height Floor Level Floor Level Floor Level Floor Level
*Pit Depth 350 350 350 350
*Head Room 2600 2600 2600 2600

* IMPORTANT NOTE: PIT & HEADROOM The Trolleylift normally serves at floor level and would require a pit in the lowest floor. If you are unable to provide a pit the Trolleylift can be installed to serve at 350mm above the lowest floor. The pit and headroom dimensions can be further reduced by modifying our stock models - please contact us for details. ** NOTE: When the car is fitted with additional gates, on a through or adjacent entrance arrangement, the width/depth is reduced by a further 50mm nominal.


300KG ... 1800 HIGH CAR 300H 300C 300HP 300CP
Landing Entrance Hinged Concertina Shutter Hinged Concertina Shutter
Landing Clear   leaf gate   leaf gate
Entrance(Nominal)
   Width 900 765 785 760
   Height 1800 1800 1690 1690
Car Entrance Protection at Front Only None None Collapsible Gate Collapsible Gate
  Internal Car Width 1000 1000 **1000 **1000
  Internal Car Depth 1000 1000 **950 **950
  Internal Car Height 1800 1800 1775 1775
Shaft
   Width 1320 1320 1320 1320
   Depth 1320 1320 1320 1320
Serving Height Floor Level Floor Level Floor Level Floor Level
*Pit Depth 600 600 570 570
*Head Room 3000 3000 3000 3000

* IMPORTANT NOTE: PIT The Trolleylift normally serves at floor level and would require a pit in the lowest floor. If you are unable to provide a pit the Trolleylift can be installed to serve at 570mm above the lowest floor.
** NOTE: When the car is fitted with additional gates, on a through or adjacent entrance arrangement, the width/depth is reduced by a further 50mm nominal.
DOWNLOADS:
Below is a range of data sheets, brochures and plans to assist you
in your choice of lift installation. More information is provided by
CE Lift Installations, phone: 01285 841 435

Microlift
Trolleylift
Goodsmaster
Data Sheets
Copyright ©2009 CE Lift Installations Limited.
tel: +44 (0)1285 841 435